Document Version: V1.3
107
Step 4 Set the schedule of other channel cameras.
Click Sync to at the bottom of the page, and select the channels to synchronize the image
parameter configuration of the D1 camera, which are D2 to D4 in this example.
Step 5 Click Save.
---End
After the setting completes, the system will enable the D1, D2, D3 and D4 cameras to record
according to the above schedule.
Method 2
Step 1 Log in to the GUI of the NVR.
Step 2 Navigate to Configuration > Storage > Schedule.
Step 3 Set the schedule of the camera D1.
1. Set Channel, which is D1 in this example, and ensure that the Recording function is
enabled.
2. Click Edit.
To Next Page
Loading...