Document Version: V1.3
106
Method 1
Step 1 Log in to the GUI of the NVR.
Step 2 Navigate to Configuration > Storage > Schedule.
Step 3 Set the schedule of the camera D1.
1. Set Channel, which is D1 in this example, and enable the Recording function.
2. Click Clear Schedule.
3. Click Normal, then hold down the left mouse and drag to draw the recording period,
which is 12:00 to 14:00 and 18:00 to 24:00 from Monday to Sunday in this example.
4. Click Alarm, then hold down the left mouse and drag to draw the recording period,
which is 8:00 to 12:00 and 14:00 to 18:00 from Monday to Sunday in this example.
To Next Page
Loading...