Tenda N3L-4H - Page 140

Document Version: V1.3
132
Step 3 Set alarm mode of the channel error.
1. Set Exception Type, which is Channel error in this example.
2. Select the channel for exception detection, which is D1 in this example.
3. Select alarm mode, which is Pop-up Window in this example.
Step 4 Set alarm mode of LAN port connection error of the NVR.
1. Set Exception Type, which is Disconnected from the internet in this example.
2. Select alarm mode, which is Pop-up Window in this example.
Step 5 Set alarm mode of unauthorized access.
1. Set Exception Type, which is Unauthorized access in this example.
2. Select alarm mode, which is Message Notification in this example.