Tenda N3L-4H - Page 148

Document Version: V1.3
140
Wi-Fi Configuration
The N3W-4H is taken as an example here.
Wi-Fi Network
Navigate to Configuration > Network > Wi-Fi > Wi-Fi Network.
You can modify the Wi-Fi parameters of the NVR, such as Wi-Fi name, Wi-Fi password and channel.
Parameter description
Parameter
Description
Wi-Fi Network
Specifies whether to enable the Wi-Fi network of the NVR.
Disabling the Wi-Fi network will affect the connection of the Wi-Fi camera.
Operate with caution.
Wi-Fi Name
Specifies the Wi-Fi name of the NVR.
Security Mode
Specifies the encryption mode of the NVR.
Wi-Fi Password
Specifies the Wi-Fi password of the NVR.
Region/Country
Specifies the country or region where the NVR is located.