Tenda N3L-4H - Page 149

Document Version: V1.3
141
Parameter
Description
Channel
Specifies the operating channel of the Wi-Fi network.
The NVR is operating on a specific channel by default. You can modify the
channel if the monitoring video is not smooth or the camera frequently goes
online and offline.
Network Mode
Specifies the wireless transmission protocol.
Bandwidth
Specifies the bandwidth of the wireless channel.
IP Address
Specifies the IP address of the wireless interface and it cannot be changed.
MAC Address
Specifies the MAC address of the wireless interface.
Connected Camera
Navigate to Configuration > Network > Wi-Fi > Connected Camera.
You can view the related information of the Wi-Fi camera currently connected to the NVR,
including IP address, MAC address, wireless speed, and uptime.
Parameter description
Parameter
Description
No.
Specifies the number of the camera.
IP Address
Specifies the IP address of the camera.
MAC Address
Specifies the MAC address of the camera.
Rate
Specifies the real-time wireless rate of the camera.
Uptime
Specifies the uptime of the camera that was last connected to the Wi-Fi of the
NVR.