Document Version: V1.3
156
Disable Lock Screen Password
If you do not want to log in again when you enter the GUI even if there is no operation during the
Lock Screen Time. You can disable the Lock Screen Password.
Procedure:
Step 1 Log in to the GUI of the NVR.
Step 2 Navigate to Configuration > System > Basics.
Step 3
Disable the Lock Screen Password function.
Step 4 Click Save at the bottom of the page.
---End
After the setting completes, even if there is no operation during the Lock Screen Time, you can
enter the GUI without logging in again.
To Next Page
Loading...