Document Version: V1.3
157
Time Settings
Overview
Navigate to Configuration > System > Time.
You can set the system time of the NVR here.
To ensure that the time-based functions of the NVR take effect normally, it is necessary to ensure
that the system time of the NVR is accurate. The NVR supports two time-setting methods:
Synchronize with the internet and Manual. The default is synchronizing with the internet.
Parameter description
Specifies the current system time of the NVR.
Specifies the standard time zone in which the NVR locates.
Specifies the format of the NVR system time.
Specify the synchronization mode of the NVR system time.
- Manual: Set the date and time manually.
- Internet: Synchronize the time of the NTP server according to the interval.
Displayed when Time Synchronization is set to Manual. They are used to manually
set the date and time of the NVR.
To Next Page
Loading...