Document Version: V1.3
187
Restore Settings
If the NVR is running slowly, or a configuration error occurs, you can try to restore the NVR.
- Restore the default settings: Except for the network configuration and user management-
related configuration, all other settings are restored to the factory settings.
- Restore factory settings: Restore all settings of the NVR to the factory settings.
.
- When the NVR restores its settings, it will disconnect all current connections.
- Restoring the settings will not delete recordings and log information.
- To avoid damaging the NVR, ensure that the NVR is powered on properly during the
process of restoring the factory settings.
Procedure:
Step 1 Log in to the GUI of the NVR.
Step 2 Navigate to Maintenance > Device Maintenance.
Step 3 Click Restore Default Settings or Restore Factory Settings according to the actual
situation.
Step 4 Read the prompt message, and click OK
---End
Wait until the progress bar completes.
To Next Page
Loading...