Tenda N3L-4H - Page 213

Document Version: V1.3
205
Parameter
Description
Time Bar
Click it to edit the recording type and the recording time, and also to delete the
recording period.
Click it to synchronize the recording schedule of the current week to other days
in the week.
Clear All
Click it to clear the current recording schedule.
Post-record
Only applicable for Alarm. Click Advanced to enter the page.
Specifies the time of continuous recording after an alarm is finished.
Configure Schedule
Assume that you want to set a schedule for D1, D2, D3, and D4 cameras as shown in the table
below:
Recording
Recording Time
Recording Type
Monday to Sunday
00:00 to 8:00
Not recording
Monday to Sunday
8:00 to 12:00
Alarm recording
Monday to Sunday
12:00 to 14:00
Normal recording
Monday to Sunday
14:00 to 18:00
Alarm recording
Monday to Sunday
18:00 to 24:00
Normal recording
After an alarm recording plan is set for the corresponding channel, the alarm event also
needs to be set for the channel in the Alarm Recording.