Document Version: V1.3
206
Step 1 Log in to the web UI of the NVR.
Step 2 Navigate to Configuration > Storage > Schedule.
Step 3 Set the recording schedule of the D1 camera.
1. Select Channel as D1, and ensure that Recording function is enabled.
2. Set the recording schedule for Monday.
(1) Click Monday, then drag the time bar.
(2) Set the first alarm recording period, which is 8:00 to 12:00 in this example.
Select Alarm and set the arming schedule, see the following figure. Click OK.
To Next Page
Loading...