Tenda N3L-4H - Page 219

Document Version: V1.3
211
Parameter
Description
Click it to sync the arming schedule of the current week to
other days in the week.
Clear All
Click it to clear the arming schedule of the current channel.
Linkage Action
Linkage Action
Specifies the alarm method of the NVR after an alarm is
triggered.
- Single Screen Display: The alarm channel is displayed on a
single screen on the Live View page after an alarm is
triggered.
- Send Email: The system will send an alarm email to the
preset receiver email after an alarm is triggered. You need
to set the relevant parameters of email for this alarm
method to take effect. Refer to Email Configuration for
details.
- Message Notification: The system will send an alarm
notification to TDSEE App after an alarm is triggered. The
NVR needs to be added successfully through TDSEE App.
Refer to Manage the NVR through TDSEE App for details.