Document Version: V1.3
214
Parameter description
Specifies the schedule for sound & light alarm.
Click the armed schedule to edit or delete the schedule. You
can hold the left mouse button and drag it to add a new
schedule.
Click it to sync the arming schedule of the current week to
other days in the week.
Click it to clear the arming schedule of the current channel.
Exception Detection
Navigate to Configuration > Alarm > Exception Detection.
The exception detection function refers to the detection and alarm of exception events. When an
exception event occurs, the system will be alarmed according to the linkage action you set.
Some descriptions of parameters and functions are as follows. Refer to Exception Detection for
details.
Parameter description
Specifies the alarm method of the NVR after an alarm is triggered.
- Single Screen Display: The alarm channel is displayed on a single screen on the
Live View page after an alarm is triggered.
- Send Email: The system will send an alarm email to the preset receiver email after
an alarm is triggered. You need to set the relevant parameters of email for this
alarm method to take effect. Refer to Email Configuration for details.
- Message Notification: The system will send an alarm notification to TDSEE App
after an alarm is triggered. The NVR needs to be added successfully through
TDSEE App. Refer to Manage the NVR through TDSEE App for details.
To Next Page
Loading...