Document Version: V1.3
76
Add Camera
The number of cameras that can be added varies with NVR models, and the actual product
prevails. You can add cameras by following the operations below when the number of added
cameras does not reach the upper limit.
- If you want to add other brand cameras, connect the camera to the LAN where the
NVR is located using an Ethernet cable.
- When adding cameras in the kit, ensure that the cameras are in the factory settings. If
not, reset the camera first.
- If it is a camera in the wireless video security kit, the camera can be discovered and
added automatically within 2 minutes after the NVR is started. After the NVR is
working properly, the camera can be discovered automatically, and you need to add
the camera manually.
- In the PoE video security kit, if the camera is connected to the PoE port of the NVR,
the camera will be discovered and added by the system within 2 minutes.
- The number of cameras that can be added of different NVRs may differ. Add cameras
according to the actual situation.
Add Cameras that are in the Same LAN as the NVR.
Step 1 Connect the camera to the LAN where the NVR is located. If the Wi-Fi camera is included
in the video security kit, place the camera within the coverage range of the NVR.
Step 2 Log in to the GUI of the NVR.
Step 3 Navigate to Configuration > Channel > Camera.
Step 4 Find the Online Camera module, then add the camera.
Method 1:
Select the camera you want to add according to the S/N, and click Add.
If the user name and password of the camera to be added are different from the NVR, add
the camera by method 2.
To Next Page
Loading...