Tenda N3L-4H - Page 83

Document Version: V1.3
75
Parameter
Description
IP address
Specifies the IP address of the camera.
Model
Specifies the model of the camera.
Status
Specifies the status of the camera.
- Connecting... (Logging in...): Specifies the NVR is trying to log in to
the camera.
- Online: The camera is successfully added to the NVR, and you can
view or manage the camera through the GUI of the NVR.
- Exception: The NVR failed to add a camera. The detailed
description is as follows.
• Camera is offline: The camera is not connected to the NVR.
Ensure that the camera is working properly.
• Network is disconnected: The network is disconnected
between the camera and the NVR. Ensure that the network is
connected properly between the camera and the NVR, and
the network parameters are configured correctly.
• Incorrect user name or password: The user name or
password of the camera is incorrect.
• The user has been locked: The login account of the camera
has been locked.
S/N
Specifies the serial number of the camera.
Firmware
Version
Specifies the firmware version of the camera.
Protocol
Specifies the protocol used by the camera to connect to the NVR.
Port
Specifies the port number of the protocol used by the camera to
connect to the NVR.
Operation
Used to perform operations for the camera:
-
Click to modify the camera bound to the channel, such as IP
address, protocol, and port.
-
Click to delete the camera.
-
Click to upgrade the firmware of the camera.
Delete
Used to delete selected Online Camera in batches.
Upgrade
Specifies you can upgrade the firmware for the selected camera.