Document Version: V1.3
80
Step 4 Find the Added Camera module, and upgrade the firmware of the camera.
Method 1: It is applicable for upgrading the firmware of multiple cameras at the same
time.
Find the cameras you want to upgrade according to the S/N, tick the camera channel
number, and click Upgrade.
Method 2: It is applicable for upgrading the firmware of a single camera.
Find the camera you want to upgrade according to the S/N, and click behind the
camera.
Step 5 Unplug the mouse and insert the USB storage device with the upgrade file in the root
directory within 1 minute. The camera will be upgraded automatically.
---End
After the upgrade completes, you can unplug the USB device.
To Next Page
Loading...