Document Version: V1.3
79
Wait a moment. The camera is added successfully. You can view the added camera in the Added
Camera module.
Upgrade Firmware of the Camera
The device can obtain new or more stable performance through a firmware upgrade.
- Before upgrading the camera firmware, ensure that the status of the camera is
Online.
- After the camera firmware is upgraded successfully, the camera will automatically
reboot and reconnect to the NVR.
- The NVR can recognize USB storage devices formatted as FAT32, exFAT and NTFS.
Method 1
It is applicable for the NVR that cannot be connected to the mouse and the USB storage device at
the same time.
Step 1 Visit www.tendacn.com to download the latest upgrade firmware of the corresponding
camera model, and unzip it to the root directory of the USB device.
Step 2 Log in to the GUI of the NVR.
Step 3 Navigate to Configuration > Channel > Camera.
To Next Page
Loading...