14
Step 2 Connect the computer to CPE1.
1. Uncover the housing of CPE1.
2. Use an Ethernet cable to connect the PoE LAN/WAN port of CPE1 to the PoE port of the PoE injector.
3. Use the included power adapter to connect the PoE injector to a power socket. The LAN/WAN LED
indicator of the CPE1 lights up.
4. Use an Ethernet cable to connect your computer to the LAN port of the PoE injector.
Step 3 Set CPE1 to AP Mode.
1. Start a web browser on the computer, and visit 192.168.2.1. Enter your user name and password
(default: admin/admin), and click Login.
To Next Page
Loading...
