Tenda O3

62
5.3.1 Throughput
It displays the throughput of WLAN and LAN ports here.
5.3.2 Wireless Client
It displays the information of wireless clients when the CPE works in AP, Repeater, P2MP, or Router mode.
Parameters Description
Name
Description
IP Address
It specifies the IP address of the corresponding wireless client.
MAC Address
It specifies the MAC address of the corresponding wireless client.
Signal/Noise
It specifies the WiFi signal strength and electromagnet interference signal strength of the
corresponding wireless client.
Transmit/Receive
It specifies the transmitting and receiving rate of the corresponding client.