using WPA2-PSK.
Mixed WPA/WPA2-PSK: It indicates that wireless clients can connect to the wireless network
corresponding to the selected SSID using either WPA-PSK or WPA2-PSK.
It specifies the encryption algorithm corresponding to the selected security mode. If Security
Mode is set to WPA-PSK, this parameter has the AES and TKIP values. If Security Mode is set to
WPA2-PSK or Mixed WPA/WPA2-PSK, this parameter has the AES, TKIP, and TKIP&AES values.
AES: It indicates the Advanced Encryption Standard.
TKIP: It indicates the Temporal Key Integrity Protocol. If TKIP is used, the maximum wireless
throughput of the AP is limited to 54 Mbps.
TKIP&AES: It indicates that both TKIP and AES encryption algorithms are supported. Wireless
clients can connect to the wireless network corresponding to the selected SSID using TKIP or AES.
It specifies a pre-shared WPA key. A WPA key can contain 8 to 63 ASCII characters or 8 to 64
hexadecimal characters.
It specifies the automatic update interval of a WPA key for data encryption. A shorter interval
results in higher data security.
The value 0 indicates that a WAP key is not updated.
WPA and WPA2
Parameters Description
The WPA and WPA2 options are available for network protection with a RADIUS server.
WPA: It indicates that the wireless network corresponding to the selected SSID is encrypted
using WPA.
WPA: It indicates that the wireless network corresponding to the selected SSID is encrypted
using WPA.
It specifies the IP address of the RADIUS server for client authentication.
It specifies the port number of the RADIUS server for client authentication.
It specifies the shared password of the RADIUS server.