Tenda W330R User Manual

Wireless-N Broadband Router
Usually allowing client
applications to use
dynamic ephemeral TCP/
UDP ports to
communicate with the
known ports used by the
server applications, even
though a
firewall-configuration may
allow only a limited
number of known ports. In
the absence of an ALG,
either the ports would get
blocked or the network
administrator would need
to explicitly open up a
large number of ports in
the firewall; rendering the
network vulnerable to
attacks on those ports.
In the default ALG
settings, the following
protocols have enabled. It
is recommended to keep
the settings unchanged.
1,FTP
2,TFTP
60

Tenda W330R Specifications

General

Bandwidth	2.4 GHz
Input voltage	110 - 240 V
xDSL connection	No
Power requirements	AC 9 V, 1.2 A
Networking features	Ethernet, Fast Ethernet, Gigabit Ethernet, WLAN
Ethernet LAN	Yes
Receiver sensitivity	270M: -70dBm@10% PER; 130M: -70dBm@10% PER; 108M: -70dBm@10% PER; 54M: -73dBm@10% PER; 11M: -85dBm@8% PER; 6M: -88dBm@10% PER; 1M: -90dBm@8%
Antenna gain level (max)	2.5 dBi
Ethernet LAN (RJ-45) ports	4
Power consumption (typical)	6 W
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %