Operator's Manual First Edition • Second Printing
Maintenance
40 RL4 Vertical Mast Part No. 1266664
Maintenance
Observe and Obey:
Only routine maintenance items specified in
this manual shall be performed by the
operator.
Scheduled maintenance inspections shall be
completed by qualified service technicians,
according to the manufacturer’s specifications
and the requirements specified in the
responsibilities manual.
Use only Terex approved replacement parts.
If this machine is equipped with the autostart
feature ensure that the toggle switch is in the
middle, or OFF, position before performing any
maintenance.
Maintenance Symbols Legend
The following symbols have been used in this
manual to help communicate the intent of the
instructions. When one or more of the symbols
appear at the beginning of a maintenance
procedure, it conveys the meaning below.
Indicates that tools will be required to
perform this procedure.
Indicates that new parts will be required to
perform this procedure.
Check the Engine Oil Level
Maintaining the proper engine oil level is essential
to good engine performance and service life.
Operating the machine with an improper oil level
can damage engine components.
Note: Check the oil level with the engine off.
1 Check the oil level dipstick. Add oil as needed.
Kubota D-1105 Engine
Oil type 10W-30
Oil type - cold conditions 5W-20
Kohler KDW-1003 Engine
Oil type 10W-30
Oil type - cold conditions 5W-20
To Next Page
Loading...
Need help?
General
