Terex RL4000 Operator's Manual

Operator's Manual
First Edition • Second Printing
Part No. 116692 RL4000 • TML-4000 17
Controls - Both Models
Control Panel
1 Light switches
Move each light switch up to turn on the
indicated light. Move each light switch down to
turn off the indicated light.
2 Main circuit breaker
Move the main circuit breaker switch up on the
control panel before turning the individual light
switches on or before attempting to use the
convenience receptacles.
3 Hour meter
The hour meter displays the number of hours the
machine has operated.
4 Ignition switch for engine
Turn the switch to the ACC position and hold the
engine prime button to prime the fuel pump.
Turn the switch to the run position and hold the
engine prime button down to prime the engine.
Turn the switch to the start position to start the
engine. Turn the switch to the off position to
turn the engine off.
5 Engine prime button
Primes the engine before starting.
6 Alternator failure light
Light on indicates that the engines DC alternator
isn’t producing enough voltage.
7 Mini breaker
Pop-out style breaker. Push in button to insure
GFI receptacle is ready for use.
8 Duplex receptacle with GFI
Convenience duplex receptacle with Ground
Fault Interrupter (GFI).
9 T-lock receptacle

Terex RL4000 Specifications

General

Number of Lights	4
Fuel Type	Diesel
Mast Height	9 m (30 ft)
Light Type	LED
Lamps	LED
Illuminated Area	4000 m²