Terex RL4000 Operator's Manual

Operator's Manual
First Edition • Second Printing
Part No. 116692 RL4000 • TML-4000 19
Pre-operation Inspection
Pre-operation Inspection
o Be sure that the operator’s manual is complete,
legible and in the storage container located on
the machine.
o Be sure that all decals are legible and in place.
See Inspections section.
o Check for engine oil leaks and proper fluid level.
Add oil if needed. See Maintenance section.
o Check for engine coolant leaks and proper
coolant level. Add coolant if necessary. See
Maintenance section.
o Check for battery fluid leaks and proper fluid
level. Add distilled water if needed. See
Maintenance section.
o Check for proper tire pressure and lug nut
torque. Add air to tires if needed. See
Maintenance section.
Check the following components or areas for
damage, improperly installed or missing parts and
unauthorized modifications:
o Electrical components, wiring and electrical
cables
o Tower components
o Tower locking pins
o Tires and wheels
o Trailer lights and reflectors
o Outriggers, leveling jacks and foot pads
o Nuts, bolts and other fasteners
o Lamp fixtures, connections and bulbs
o Cable (kinks, frays and abrasions)
o Safety chains (if required)
o Engine and related components
o Fuel tank
o Generator
Check entire machine for:
o Cracks in welds or structural components
o Dents or damage to machine
o
Excessive rust, corrosion or oxidation
o Be sure that all structural and other critical
components are present and all associated
fasteners and pins are in place and properly
tightened.
o Be sure that the battery is in place and properly
connected.

Terex RL4000 Specifications

General

Number of Lights	4
Fuel Type	Diesel
Mast Height	9 m (30 ft)
Light Type	LED
Lamps	LED
Illuminated Area	4000 m²