The
following gauges
are
used to monitor the
machine:
1 -Fuel Level
2 - Water Temperature, Engine
3 -
Oil Pressure, Engine
4 - Oil Temperature, Powershift Transmission
5 -
Oil Pressure, Powershift Transmission
6 -Voltmeter
GAUGES
HYDRAULIC PUMP
DESTROKE BUTTON
& DANGER
Depressing the pump de stroke button while operating the machine
will cause
an
immediate loss
of
hydraulic power, possibly
creating a very dangerous situation. Hydraulic functions that
will
be
affected are:
FORK
TILT, LIFT,
BOOM
EXTEND
and RETRACT, PARKING BRAKE and SWAY. None
of
these
functions will operate as long as the button is depressed. The
service brakes will continue to function
if
the accumulator backup
has a sufficient gas charge.
The
pump destroke button (C) is the black push button
switch located
on
the dash panel.
For example, when starting the machine for the first time
on
a 30
degree
F.
day, depress the pump destroke button while starting
the engine. Continue to depress the button for
15
to
20
seconds
after the engine starts.
Once the engine is running smoothly,
release the button and the hydraulic pump will engage.
Depressing the pump destroke button will
not
be
required for
all other starts
of
the day, unless the engine has been allowed
to cool completely.
3-9
c
o
o
To Next Page
Loading...
