EasyManua.ls Logo

Terex TH644C - Before Starting the Engine

Terex TH644C
94 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
OPERATION
BEFORE STARTING THE ENGINE
ffiWARNING
DO
NOT
perform any procedures in this section, "BEFORE
STARTING ENGINE", unless the machine's engine is turned
off
and the parking brake is applied and the engine is cool. Failure
to do so may result in serious injury, death or damage to the
equipment.
Walk around the machine and check for any parts that are
missing, worn, damaged, or leaking. Repair and/or replace
damaged parts.
CHECK ENGINE
OIL LEVEL
Location: Dipstick (A).
To
Check: The machine must be level.
Check when the engine is cold.
Remove the dipstick from the engine.
Oil should read between the add and the
full marks.
Replace the dipstick.
NOrE:
Refer to page 5-24
of
this manual for the proper oil
specifications and capacities.
4-4
A
John Deere

Table of Contents

Related product manuals