EasyManua.ls Logo

Terex TH644C - Transportinga Load; Transporting a Load

Terex TH644C
94 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
OPERATION
TRANSPORTING A LOAD
LtWARNING
Transporting a load with the boom extended and the boom
angle indicator arrow (D) reading more than
0 degrees could
cause a roll over hazard.
LtWARNING
At no time should any load be suspended from the forks by
use
of
chains, ropes, straps etc.
If
a load must
be
suspended
the use
of
a truss (jib)
boom
is mandatory. Proper rigging
procedures should always be followed.
The forks should always be tilted back slightly during
transportation to ensure stability
of
the load.
The load should be kept as low to the ground as possible
while traveling. Always move a loaded machine with the
boom
angle indicator (D) at 0 degrees
or
less.
4-15
D

Table of Contents

Related product manuals