OPERATION
TRANSPORTING A LOAD
ffiWARNING
Slower speeds should be used whenever transporting a load.
Always bring the machine to a complete stop before reversing
the transmission control lever (A). Failure to do so can result in
damage to the load, the machine and/or bystanders.
Always keep the
boom
retracted to ensure greater stability.
Always place the load in the center and completely against the
back
of
the fork frame.
By
doing so greater stability will result.
IMPORTANT:
Never attempt to use the forks and/or attach-
ments for prying wedged
or
frozen loads free. Damage to the
load, pallet and/or machine could result.
4-16
A
To Next Page
Loading...
