Terex TH644C - 1000 Hour Maintenance Procedures

1000 HOUR MAINTENANCE
Perform "BEFORE SERVICING PROCEDURES" before
attempting any of the following checks.
Complete all "DAILY MAINTENANCE" checks prior to this
time interval.
Complete all
"50 HOUR MAINTENANCE" checks prior to this
time interval.
Complete all
"100 HOUR MAINTENANCE" checks prior to
this time interval.
Complete all "250 HOUR MAINTENANCE" checks prior to
this time interval.
Complete all "500 HOUR MAINTENANCE" checks prior to
this time interval.
Complete all "750 HOUR MAINTENANCE" checks prior to
this time interval.
Perform
"BEFORE OPERATING CHECKS" before attempt-
ing any of the following checks.
MANUFACTURER ENGINE MANUALS ARE AVAILABLE
FROM YOUR LOCAL TEREX HANDLER DEALER.
ADJUST ENGINE VALVES
To Adjust: See engine manual for procedure.
CHECK FAN BELT TENSION
To Check: See engine manual for procedure.
CHECK FAN BELT CONDITION
To Check: See engine manual for procedure.
CHANGE TRANSMISSION OIL AND FILTER
To Change: Refer to procedure listed on page 5-13 of this
manual.
5-21