Terex TH644C - Required Grease Intervals

MAINTENANCE PROCEDURES
REQUIRED GREASE INTERVALS
LOCATION DAlLY 50Hrs. 250Hrs
500Hrs.
SMALL BOOM ROLLERS (4)
•
BASE END TILT CYLINDER
•
HEAD END TILT CYLINDER
•
FORK FRAME PNOT PIN (2)
•
HEAD END LIFT CYLINDER (2)
•
BASE END LIFT CYLINDER (2)
•
FRONT DRIVESHAFT (3)
•
REAR DRIVESHAFT (3)
•
BASE END SWAY CYLINDER (2)
•
HEAD END SWAY CYLINDER (2)
•
BOOM PIVOT (2)
•
REAR AXLE TRUNIONS (4)
•
FRONT AXLE TRUNIONS (4)
•
FRONT AXLE PNOT (2)
•
REAR AXLE PIVOT (2)
•
MIDDLE BOOM ROLLERS (4)
•
BASE END REAR LOCK UP
•
CYLINDER (2)
HEAD END REAR
LOCK UP
•
CYLINDER (2)
5-6