MAINTENANCE PROCEDURES
500 HOUR MAINTENANCE
Perform
"BEFORE SERVICING PROCEDURES" before
attempting any
of
the following checks.
Complete all "DAILY MAINTENANCE" checks prior to this
time interval.
Complete all
"50
HOUR
MAINTENANCE" checks prior to this
time interval.
Complete all
"100
HOUR
MAINTENANCE" checks prior to
this time interval.
Complete all
"250
HOUR
MAINTENANCE" checks prior to
this time interval.
Perform
"BEFORE OPERATING CHECKS" before attempting
any
of
the following checks.
REPLACE FUEL FILTERS
Location: Filter (D).
Water separator (E).
To
Change:
Wipe all the dirt from the area surrounding
the
ftlter( s).
Remove the filter(s). Thoroughly
clean
the gasket
sealing surface after
ftlter removal.
Fill the new filter( s) with fuel.
Install the new filter(s).
Install the
ftlter( s) according
to
the filter
manufacturer's specifications.
NOTE: John Deere engines only have one filter element. It is used as a
filter and water separator.
5
-19
D&E
John Deere
To Next Page
Loading...
