100 HOUR MAINTENANCE
CHANGE
AXLE
PLANETARY
END
OIL
Location:
Filler/drain plug (A).
To
Change:
Rotate the wheel end until the filler/drain plug
is at the lowest
point
of
the wheel end.
Remove the filler/drain plug and allow the oil
to drain completely into a proper collection
container.
Rotate the wheel end until the filler/drain plug
hole is at the 3
or
9 o'clock position.
Fill with oil until it flows freely from the filler/
drain plug hole.
Replace the filler/drain plug (A).
NOTE:
This
time interval is for the first initial 100 hours. Refer
to
page 5-5
of
this manual for additional service intervals.
NOTE: Refer
to
page 5-24
of
this manual for the proper oil
specifications and capacities.
CHANGE TRANSMISSION OIL
AND
FILTER
To
Change:
Refer to the procedure listed on page 5-13
of
this
manual.
NOTE:
This
time interval is for
the
first initial 100 hours. Refer
to
page 5-5
of
this manual for additional service intervals.
5-16
A
To Next Page
Loading...
