Terex TL80 - Driving, Steering and Braking; Driving

Operation 4
TL80 47
4.8 Driving, steering and braking
4.8.1 Driving
When driving on public roads, the wheel
loader, as a self-propelled work machine,
is subject to the legal regulations valid in
the user's country. (For example, in the
Federal Republic of Germany, StVZO
and StVO).
The machine has two preselection
switches for travel direction which are
alternately active.
Change-over by operating the multi-
function switch (16/35).
One preselection switch for travel
direction (16/36) is located on the
instrument panel and another such
switch on the joystick (16/7) controlling
the working hydraulics.
The multi-function switch (16/35) is
only to be pressed if the machine is at
a standstill and both travel direction
preselection switches are in neutral
position. If the two direction-of-travel
preselection switches are pressed in a
contradictory manner, the machine stops.
When driving on roads, the joystick
(16/7) for the work equipment must be
deactivated by operating the multi-
function switch (16/35).
By doing so, the travel direction
preselection switch on the joystick (16/7)
is without function, too.
The direction of travel is preselected
using the switch (16/36) on the
instrument panel.
In working mode, the joystick (16/7) for
the work equipment must be activated by
operating the multi-function switch
(16/35).
By doing so, the switch (16/36) on the
instrument panel is without function.
The direction of travel is preselected
using the travel direction preselection
switch on the joystick (16/7).
Fig. 16 Operation