Operation 4
TL80 51
4.8.5 Switching off the machine (parking)
• Set the direction-of-travel preselection rocker
switches (21/7 and 21/36) to "0".
• Lower the work attachment onto the ground.
• Switch off the working hydraulics (21/35).
• Apply the parking brake (21/9).
• Switch the engine off and remove the ignition
key.
• Lock the cab after finishing work to keep
unauthorized persons from getting in.
If necessary, use chocks to stop the
machine from rolling away.
Fig. 21 Operation
To Next Page
Loading...
