Rev. A
Name Min Max Severity Description
PSAT Calibration Running Warn-
ing
Warning
Indicates that a PSAT calibrating session is ongoing and that
optimal transceiver performance cannot be expected
PSAT Not Calibrated Warning Warning
Indicates that a PSAT calibration has not been completed with
the current frequency planning configuration
Setup Table Status#Motor Control-
ler
Error
Short-Circuit Protection Sta-
tus#Motor Controller
Error
Synthetic Encoder Data Enabled
Warning
Warning
Indicates that synthetic encoder data generation is active (i.e.
the Synthetic Encoder Data parameter has been set to 'Enable')
Time Not Synchronized#ET2 Warning Time has not (yet) been synchronized with the time server
Time Not Synchronized#HK Warning Time has not (yet) been synchronized with the time server
Track Drop Threshold Auto Over-
load Error
0.0 100 Error The track generation overload.
Track Drop Threshold Auto Over-
load Warning
-
10.0
0 Warning The tracker is approaching track generation overload.
Track Publisher Input Link Error Could not connect to data input source.
Transceiver Configuration Restore
Error
Error Indicates that a restore operation has failed
Under Voltage Error#Motor Con-
troller
Error
Video Server Link Error 0 1 Error
To Next Page
Loading...
