Reference Documents | 1-3
ETS 300 019-1-4
Equipment Engineering (EE): Environmental Conditions and
Environmental Tests for Telecommunications Equipment. Part 1-4:
Classification of environmental conditions. Stationary use at non-
weather protected locations.
ETS 300 019-2-1
Equipment Engineering (EE): Environmental Conditions and
Environmental Tests for Telecommunications Equipment. Part 2-1:
Specification of environmental tests; Storage
ETS 300 019-2-2
Equipment Engineering (EE): Environmental Conditions and
Environmental Tests for Telecommunications Equipment. Part 2.2:
Specification of environmental tests; Transportation
ETS 300 019-2-3
Environmental Engineering (EE); Environmental conditions and
environmental tests for telecommunications equipment; Part 2-3:
Specification of environmental tests; Stationary use at weather
protected locations
ETS 300 019-2-4
Equipment Engineering (EE): Environmental Conditions and
Environmental Tests for Telecommunications Equipment. Part 2-4:
Specification of environmental tests; Stationary use at non-weather
protected locations
MIL-STD-810G Environmental Engineering Considerations and Laboratory Tests.
2011/65/EU Restriction of the use of certain hazardous substances (RoHS)
EN IEC 63000:2008
Technical documentation for the assessment of electrical and
electronic products with respect to the restriction of hazardous
substances
2015/863
Amending Annex II to Directive 2011/65/EU of the European
Parliament and of the Council as regards the list of restricted
substances
EMC/EMI Standards
2014/30/EU Electromagnetic Compatibility (EMC)
EN 55032:2015/AC:2016-07
Electromagnetic compatibility of multimedia equipment - Emission
requirements
EN 55024:2010/A1:2015
Information technology equipment - Immunity characteristics - Limits
and methods of measurement
EN 61000-3-2:2014
Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for
harmonic current emissions (equipment input current <= 16 A per
phase)
EN 61000-3-3:2013
Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of
voltage changes, voltage fluctuations and flicker in public low-voltage
supply systems, for equipment with rated current <= 16 A per phase
and not subject to conditional connection
EN 61000-3-11:2000
Electromagnetic compatibility (EMC) - Part 3-11: Limits - Limitation of
voltage changes, voltage fluctuations and flicker in public low-voltage
supply systems - Equipment with rated current <= 75 A and subject to
conditional connection
EN 61000-3-12:2011
Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for
harmonic currents produced by equipment connected to public low-
voltage systems with input current > 16 A and <= 75 A per phase
EN 61000-4-2:2009
Electromagnetic compatibility (EMC) - Part 4-2: Testing and
measurement techniques - Electrostatic discharge immunity test
Table 1.1
Satellite Operation Standards (Continued)
To Next Page
Loading...
