6.4.8 Rain
Press the SET key 15th to select rainfall unit ( inch or mm) the default
mode is mm).
- In normal mode, press and release the RAIN key to view rain of rate,
event, day, week, month and total.
- Press the RAIN key for 2 seconds to reset current display rain.
Note:
week rain, will auto reset day rain
month rain, will auto reset week and day rain.
total rain, will auto reset month, week and day rain.
Note:
rate: the last 10 minutes rainfall multiplication 6.
event: It start to record the rain event value form the rain falls,
the rain event is over and value reset to 0 if the last 24 hour rainfall is
less 1mm and the last 1 hour no rain fall.
defined by calendar day i.e. 0:00 - 24:00 with current date.
defined by calendar week i.e. Sunday – Saturday.
defined by calendar Month i.e. January 1 - January 31.
running total since station was powered up
Note: the transmitter will send/transmit the wind speed, wind direction,
rainfall every 16 seconds
To Next Page
Loading...
