TEST SEQUENCE
This is used to configure test sequences. It allows creating, copying,
and deleting test sequences, as well as setting up complex test
scenarios that can be run on the TEST panel. For more details on test
sequence configuration, please refer to the TMA Operations Manual
section 2.3.9 TEST SEQUENCE TAB.
MANUAL TEST
This allows the user to adjust all system parameters on the fly and
run a single test at a time. It does not use predefined sequences. For
more details on conducting a manual test, please refer to the TMA
Operations Manual section 2.3.10 MANUAL TEST TAB.
To Next Page
Loading...
