OPERATIONS MANUAL
+1 215 785 2338 www.tescometering.com
support@tescometering.com
8.1 Troubleshooting
1. No Power-Check.
Make sure the power cord is plugged into the outlet. Check the power outlet, fuse, or circuit
breaker.
2. Test won't be able to proceed.
Check if correct meter form is selected.
3. I inserted a meter, but when I try to start a test, the unit prompts me to insert a
meter.
The meter may not be fully seated. Press the METER RELEASE button, remove the meter, and
reinsert the meter into the socket. Make sure you hold the meter in place until the METER
RELEASE indicator light turns on.
For more information on troubleshooting, please contact TESCO. See section 1.2 Contacting TESCO for
contact details.
To Previous Page
Loading...