OPERATIONS MANUAL
+1 215 785 2338 www.tescometering.com
support@tescometering.com
Introduction
State-of-the-Art Meter Accuracy Testing in an Affordable Desktop Configuration!
Tired of waiting for access to a production test board? Tired of wasting time going to another
building to use test equipment? Need flexibility, state -of-the-art performance, and ease of use?
If so, then TESCO’s revolutionary 2990 Desktop Meter Test Station (DTS-2990) is the answer to
what you need.
The 2990 revolutionizes meter testing by providing full series parallel meter testing in a small,
budget-friendly desktop package.
A fully ANSI compliant test board, it offers complete testing of all meters under the widest range
of test conditions. It can perform Manual Test, Sequence Testing, PLC Test, and Disconnect Test
for meters with a wide array of forms. It has a database for storing and viewing of the test data.
The new waveform generator has all waveforms called out in ANSI C12.20-2015 (pub. 4/2017).
All common electromechanical and solid-state meters up to 50 amps can be tested with the
2990 using the single voltage and three isolated current sources.
For more than 110 years customers have trusted TESCO for accuracy and reliability. When you
think metering, think TESCO.
DTS- 2990 will be referred as “Instrument” all throughout the operational manual.
Contacting TESCO
To contact TESCO, call one of the following telephone numbers:
Technical Support: 215.785.2338
Calibration/Repair: 215.785.2338
Visit our website at www.tescometering.com or send an email to support@tescometering.com.
To view, print, or download the latest manual supplement, visit www.tescometering.com.
To Next Page
Loading...
