Tesmec DLR300 - Restoring the Default Configuration


Page 31



4.2.4 LOADING A NEW LANGUAGE
& Press: or to navigate the menu and select the LOAD A NEW
LANGUAGE function
♦ Select: LOAD A NEW LANGUAGE
& Press: to access the configuration of loading a new language
 The following appears: LOAD A LANGUAGE
Waiting for connection..
Connect the recorder to a personal computer that has the firmware management programme
installed and proceed as described in paragraph 6.2, DLR300 BOOTLOADER USER GUIDE
4.2.5 RESTORING THE DEFAULT CONFIGURATION
& Press: or to navigate the menu and select the DEFAULT
CONFIGURATION function
♦ Select: DEFAULT CONFIGURATION
& Press: to access the recovery of the factory settings
ATTENTION: this function deletes all the RAM of the recorder. Following this
operation the instrument returns to the default settings, requiring new configuration
data to be entered or previously saved data to be restored.
 The following appears: INITIALISE INSTRUMENT
Attention! Confirm? NO
& Press: or to edit the selection to YES
& Press: to confirm
or
& Press: or to edit the selection to NO
& Press: to return to the configuration management page.