Tesmec DLR300 - SETTING THE DISPLAY CONTRAST


Page 9



3.5.4 SETTING THE YEAR
♦ Select: Year: yy
& Press: or to select the correct year.
& Press: to confirm the selection and move on to the next setting
or
& Press: to return to the main menu without saving any changes made.
3.5.5 SETTING THE HOURS
♦ Select: HOURS: hh
& Press: or to select the correct hour.
& Press: to confirm the selection and move on to the next setting
or
& Press: to return to the main menu without saving any changes made.
3.5.6 SETTING THE MINUTES
♦ Select: Minutes: mm
& Press: or to select the correct minutes.
& Press: to confirm the selection and move on to the next setting
or
& Press: to return to the main menu without saving any changes made.
3.5.7 SETTING THE SECONDS
♦ Select: Seconds: ss
& Press: or to select the correct seconds.
& Press: to confirm the selection and return to the main menu
or
& Press: to return to the main menu without saving any changes made.
3.6 SETTING THE DISPLAY CONTRAST
To change the display contrast, in order to improve readability in different lighting conditions,
access the main menu:
& Press: or to navigate the menu and select the DISPLAY CONTRAST
function
♦ Select: DISPLAY CONTRAST
& Press: to access the display contrast adjustment page
 The following appears: Contrast: 50% (or another pre-set percentage)
& Press: or until the desired percentage is selected.
& Press: to confirm the selection
or
& Press: to return to the main menu without saving any changes made.