8 Main menu
8.3 Memory
Note on the differential trigger programming in
combined probes:
If combined probes are used for the starting criterion
“Difference” there is not enough space in line 3 of the
display to show clearly the channel and the parame-
ter.
In the 3rd line of the display opposite only “K2”
appears at the end of the line. The parameter is allo-
cated correctly by numbering the key confirmations
of <up> <down>.
The confirmation of a starting criterion via <Enter>
triggers a jump to the"PROGRAM RATE" parameter.
Prog.Start
Difference
K2: °C -K2
10.00
19
Note:
The program end criterion is delayed in relation
to the programmed start limit value (hysteresis):
the program continues saving for a short time
even though the programmed limit value is no
longer overrun.
To Next Page
Loading...
