TESTO 770 - 5.6 Explanation of icons

5 Overview
12
5.6 Explanaon of icons
Icon
Meaning
Attention! Warning about a danger spot, refer to instrucon manual
Caution! Dangerous voltage, risk of electric shock
Applicaon around and removal from HAZARDOUS LIVE conductors is
permied.
Connuous double or reinforced insulaon complies with category II
DIN EN 61140 / IEC 536
The product testo 770-1/-2/-3 (0590 7703) is cered for the US and
Canadian markets, in accordance with the applicable American and
Canadian standards.
The product testo 770-3 (0590 3770) is cered for the US and
Canadian markets, in accordance with the applicable American and
Canadian standards.
Conforms to UL STD 61010-1, 61010-2-032
Cered to CSA STD C22.2 NO. 61010-1, 61010-2-032
Compliance mark for ACMA (Australian Communicaons and Media
Authority) guidelines.
The product testo 770-1/-2/-3 (0590 7703) has been tested to the
requirements of CAN/CSA-C22.2 No. 61010-1, second edion,
including Amendment 1, or a later version of the same standard
incorporang the same level of tesng requirements.
KC (South Korea)
Japan cercaon
ANATEL (Brazil)
Earth (ground) terminal according to IEC60417
CAT III
Measurement category III is applicable to test and measuring circuits
connected to the distribuon part of the building's low-voltage mains
installaon.
CAT IV
Measurement category IV is applicable to test and measuring circuits
connected at the source of the building's low-voltage mains
installaon.
Bluetooth
testo 770-3 only
Conformity mark, veries compliance with the valid EU Direcves:
EMC Direcve (2014/30/EU) with the EN 61326-1 standard, Low-
Voltage Direcve (2014/35/EU) with the EN 61010-1 standard.
For testo 770-3 (0590 3770): Conformity mark, veries compliance
with the valid EU Direcves: RED Direcve (2014/53/EU).
The instrument complies with the WEEE Direcve (2012/16/EU)