TESTO 872 - Using the Thermography App

5 WLAN connection - using the App
17
5.2 Using the App
5.2.1 Establishing a connection
✓
WLAN is enabled in the thermal imager.
1
- Smartphone/tablet → Settings → WLAN settings → camera is
shown with serial number and can be selected.
2
- Press Connect.

The WLAN connection to the thermal imager is established.
5.2.2 Select display
Second display
✓
The WLAN connection to the thermal imager is established.
1
- Selection → 2nd display.

The display on the thermal imager is shown on your mobile end
device.
Remote
✓
The WLAN connection to the thermal imager is established.
1
- Selection → Remote.

The display on the thermal imager is shown on your mobile end
device. The thermal imager can be controlled and settings made via
the mobile terminal device.
Gallery
✓
The WLAN connection to the thermal imager is established.
1
- Selection → Gallery.

The saved images are displayed and can be managed.