TESTO 872 - Configure Key; Ambient Conditions; Info

7 Performing the measurement
34
7.9.5 Configure key
1
Select Menu → Configuration → Configure key.
2
See the section “Quick select button”.
7.9.6 Ambient conditions
Measurement deviations arising due to high humidity or large distances to the
object to be measured can be corrected. Correction parameters must be
entered for this.
If the camera is connected to an optional humidity radio probe, the ambient
temperature and humidity are transferred automatically.
Values for ambient temperature (Temperature) and ambient humidity (Humidity)
can be set manually.
1
- Select Menu → Configuration → Ambient conditions.
2
- Move the joystick up/down to set the temperature value.
3
- Move the joystick to the right.
4
- Move the joystick up/down to set the humidity value.
5
- Select ✔ and press OK.
7.9.7 Info
1
- Select Menu → Configuration → Info.

The following instrument information is displayed:
• Device data (e.g. serial number, device name, firmware version)
• Options
• Measurement settings
• Connectivity