TESTO 872 - Selecting the Colour Palette; Image Type; Configuration; Settings

7 Performing the measurement
31

RTC and emissivity are automatically adjusted.
5
- Press OK.
If it is not physically possible to determine the emissivity due to the
same object temperature and reflected temperature, the input field
opens again. The emission value must be input manually.
7.7 Selecting the colour palette
This function is only available if the Image type is set to infrared image.
1
- Select the Palette function.
2
- Move the joystick up/down to select the required colour palette and
then press OK.
7.8 Image type
The display can be switched between infrared image and real image (digital
camera).
1
- Select the Image type function.
2
- Move the joystick up or down and choose between infrared image or
real image view.
3
- Press OK to confirm the selection.
7.9 Configuration
7.9.1 Settings
Country settings
The user interface language can be set.
1
- Select Configuration → Settings → Country settings.
2
- Move the joystick up/down to select the required language and
then press OK.