TESTO Saveris 2 User Manual

• WiFi data logger is not responding: monitor the WiFi data logger for
data transmission failure. Click on the Activate button and configure the
monitoring cycle using the slide control.
Note
The set time should be greater than the WiFi data logger's
communication cycle.
• WiFi data logger: measuring point group/measuring point which is to be
monitored. Click on the checkbox in front of the measuring point
group/measuring point.
• E-mail recipient: addressees who are informed when an alarm occurs.
Click on the checkbox in front of the recipient or enter the name and e-
mail address of other recipients and click on the + Add button.
• SMS recipient: addressees who are informed when an alarm occurs.
Click on the checkbox in front of the recipient or enter the name and
mobile phone number of other recipients and click on the + Add button.
• Save: click on the button to save the settings.
• Delete: click on the button to delete the system warning.

TESTO Saveris 2 Specifications

General

Protection Class	IP54
Measurement Parameters	Temperature, humidity, pressure
Connectivity	WiFi
Data Storage	Internal memory
Power Supply	Replaceable batteries
Operating Temperature	-30 to +50 °C
Battery Life	24 months
Humidity Range	0 to 100% RH
Alarms	email/SMS notification
Software	Testo Cloud software
Certifications	EN 12830