TESTO Saveris 2 - 16 Change History

16 Change history
Information about changes to the testo Saveris 2 Cloud:
Revision Release date Improvements
10351 2015-03-26 • Automatic reports can now be created
• Vertical help lines in the PDF report
were optimized
• SMS alarms can now be sent in
Russian, Japanese, Chinese and Turkish.
• New users will with immediate effect
be created as standard in the language of the
account owner
• Measurement values were sometimes
shown in the report with two decimal places,
although the data logger only allows one
decimal place maximum. This has been
adapted in the reports
• Several design errors in the web
presentation have been rectified.
• Deleting an alarm setting for
individual channels/measurement locations
from a T3 and T2 no longer deletes both
channels.
• Internal errors on the web application
are now presented in a uniform way.
• Errors with several users with
different languages have been rectified.
• Only the most current Firmware
version is shown per logger type, including the
status
• Periods of unrestricted length can
now be selected in graph and reports,
independently of the selected measurement
rate
• Settings for day/night communication
rate are now checked for plausibility
• An error in the representation of units
in the CSV report has been rectified
• The user settings for the account
owner have been corrected.
• The time selection in the analysis
area has been improved with regard to the use
of the Japanese language and the use of