TESTO Saveris 2 User Manual

WiFi data
logger
T1 T2 T3 H1 H2
Order
number
0572 2031 0572 2032 0572 2033 0572 2034 0572 2035
Measuring
range
-30 to
+50 °C
-50 to
+150 °C
K: -195 to
+1350 °C
J: -100 to
+750 °C
T: -200 to
+400 °C
-30 to
+50 °C
0 to
100% RH
1
Probe-specific
Accuracy
±1 digit
± 0.5 °C ± 0.3 °C ± (0.5 °C +
0.5% of
reading)
± 0.5 °C
± 2% RH
(at 25 °C,
2 to 98 RH)
Probe-specific
Resolution 0.1 °C 0.1 °C 0.1 °C 0.1 °C
0.1% RH
Probe-specific
Saveris 2 WiFi data loggers are supplied with a factory calibration
certificate as standard. In many applications, it is recommended that
you recalibrate the loggers every 12 months. This can be carried out
by Testo Industrial Services (TIS) or other certified service providers
with the aid of easy-to-use service software. Please contact Testo for
further information.
6.1.2 General data
WiFi data logger T1 T2 T3 H1 H2
Order number 0572 2001 0572 2002 0572 2003 0572 2004 0572 2005
Operating
temperature
-30 to +50 °C
Storage temperature
(without batteries)
-40 to +60 °C
Protection class IP 65 IP 65 IP 54 IP 30 IP 54
Measuring cycle 1 min
4
to 24 h (15 minutes default)
Communication cycle 1 min to 24 h (15 minutes default)
4
depending on the licence purchased

TESTO Saveris 2 Specifications

General

Protection Class	IP54
Measurement Parameters	Temperature, humidity, pressure
Connectivity	WiFi
Data Storage	Internal memory
Power Supply	Replaceable batteries
Operating Temperature	-30 to +50 °C
Battery Life	24 months
Humidity Range	0 to 100% RH
Alarms	email/SMS notification
Software	Testo Cloud software
Certifications	EN 12830