5 Licences
When purchasing your Saveris 2 system you will receive a free basic licence.
Some measuring functions which are displayed in your Saveris 2 system are
inactive. By expanding your licence you can activate and use these functions.
In the header you can see which licence you are currently using.
Purchase licence
By clicking on the licence display in the header you will be redirected to the
licence shop. Here you can choose and purchase your licence expansion.
Or
Click on the symbol next to the inactive measuring function . This
also opens the licence shop to expand your licence.
5.1 testo Saveris 2 App
The free testo Saveris 2 App offers you practical functions for commissioning,
network analysis and receiving Saveris 2 push messages.
Specifications of the testo Saveris 2 App
Commissioning
The configuration wizard offers user-friendly recognition and selection of the
WLAN network which enables an easier and faster integration of the loggers.
Push recipient:
addressees who are informed when an alarm occurs. Click on the checkbox in
front of the recipient to send push messages.
Please note that the free testo Saveris 2 App must be installed on your Android
or iOS device to receive push messages.
To use the Saveris 2 App for simple logger commissioning, a 5 min. hotspot
mode must be activated on the loggers
1
by pressing the control key briefly
(2 sec.). Briefly press it twice to place loggers
2
with WPA2 Enterprise
functionality into hotspot mode. This function only works after delivery when the
logger’s factory settings are still active. A logger which has already been
configured can be reset to the factory settings either by logging into the web
1
For item numbers: 0572 2001, 0572 2002, 0572 2003, 0572 2004, 0572 2005
2
For item numbers: 0572 2031, 0572 2032, 0572 2033, 0572 2034, 0572 2035
To Next Page
Loading...
Need help?
General
